Pfaff creative 7570 Instruction Book page 282

Remove the fabric from the frame and measure the
length of the pattern. Halve this length. This shows
you where the middle of the pattern is. Now mark
the middle of the fabric with a dot This is very
important because the placing and moving of a
pattern in the embroidery frame is always based
around the middle of the pattern. When you begin
to sew the machine skips back to the pattern start
automatically.
Now fit the fabric into the frame again so that the
line is parallel to the frame. Now position the
needle exactly over the marking in the middle of
the fabric using the
v'4
symbols. Using key 7
ensure that the pattern borders on the
previously em broidered pattern.
Now embroider the second pattern. All further
patterns are to be embroidered using the same
procedure.
2
S
E
0,
93
ii