Maintenance And Trouble-Shooting; Changing The Needle Plate; Cleaning And Oiling - Pfaff select 150 Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

Changing the needle plate

Switch off the main switch (1)

It is very important to clean your sewing

machine, because it will reward you with

a longer service life. The more often you

use the machine, the more care it needs.

Removal:

• Raise the presser foot and remove the

removable accessory tray.

• Push the point of a small screwdriver

into the opening between needle plate

and sewing machine.

• Twist it lightly to the right and the

needle plate will snap half way

out of its mounting. Now push the

screwdriver into the left opening and

take the needle plate out.

Replacing:

• Place the needle plate on at at the

back and push it down with both

hands at the front until you hear it

snap in place. Before you start sewing,

check that the needle plate is lying at.

Cleaning and oiling

Switch off the main switch (1)

• Remove the needle plate and lower the

feed dogs.

• Clean the feed dogs and hook area

with the brush.

• Apply a drop of oil (every 15 to 20

hours of operation) to the hook as

shown in the illustration.

Note: Use good quality sewing machine oil

only!