Table of Contents
Advertisement
Panasonic Electric Works Nordic AB
MEW01091
Rev: 3
21
21.1
Software (S/W) download
The latest version of the EBL128 software
before the delivery. Due to continual development and improvement,
different S/W versions can be found. EBL128 can be upgraded with a
new S/W version, downloaded on site, via Win128.
(current) EBL128 S/W version is shown in menu H3 or via Win128.
See also the Win128 help chapter (help topic) "Download Software".
NOTE!
Upgrade from S/W version 1.0.x to version 1.1.x, is
performed as described below in chapter "Upgrade of S/W version
1.0.x to version 1.1.x in EBL128 (c.i.e.)".
Download of S/W in EBL128 (c.i.e.)
To download new software (S/W), a PC and Win128 are used. Before
download, the PC has to be connected to the RS232 connector J3 in
EBL128 (on the main board).
1. Start Win128. Log on to EBL128. In the "Tools" menu select
"Download Software..." to open the dialog box and do the
required settings, i.e. mark the checkbox "Download software",
select the path and the S/W file, e.g. EBL128_V.V.bin.
(V.V = version number, e.g. 1.1.)
70
If also a text file
shall be downloaded do not forget to mark the
checkbox "Download texts" and select the path and the text file,
e.g. English_texts_EBL128_V.V.sst).
2. Select "Port" (on the PC) and baud rate. (If the download is not
successful it might depend on to high baud rate.)
3. Start the download, i.e. click "Start". The download status is
indicated in the progress bar. LED "Operation" (L6) will be
69
The software (firmware) makes the microprocessor work.
70
The text file contains all the text that will be shown in the EBL12 display.
Normally a new text file will come together with a new S/W file.
NOTE! If only the text file shall be downloaded, do not mark the checkbox
"Download software".
71
EBL128 Operating Instructions V1.1.x
69
is factory downloaded
The valid
Advertisement
Table of Contents
