Table of Contents
Advertisement
Panasonic Electric Works Nordic AB
MEW01091
Rev: 3
1:Restart, 2:Erase memory
Press "1" to perform a restart (you will also leave the Boot menu).
Press "2" to open the Erase memory menu, see below.
The Erase memory menu:
1 = SSD, 2 = SSW, 3 = Texts
Press "1" to erase the SSD memory.
Press "2" to erase the SSW memory.
Press "3" to erase the texts memory.
"Erasing SSD", "Erasing SSW" and "Erasing texts" respectively will
be shown and then the Erase memory menu will be shown again.
Press "Return" to go back to the Boot menu.
NOTE! After erasing the SSW, perform a "Power down / power up"
restart directly.
NOTE! All other alternatives are strictly forbidden to use. These are
only for use at trouble shooting controlled by Panasonic personal.
77
EBL128 Operating Instructions V1.1.x
Advertisement
Table of Contents
