Table of Contents
Advertisement
USING THE SIDE BURNER
Inspect the gas supply hose prior to turning on
the gas. if there is evidence of cuts, wear or
abrasion, it must be replaced prior to use. Do not
use the side burner if gas odor is present.
,,._'_, WARNING
I
Always keep your face and body as far away from
the burner as possible when lighting.
LIGHTING INSTRUCTIONS
1.
Remove any cooking utensils from the burner
grate and open the top cover or lid.
2. Push and turn the control knob
counterclockwise
to the "HI" setting.
3.
If the burner does not light, turn the control
knob to the "OFF" position.
.
.
if the smell of gas is detected and the igniter
is not functioning, immediately turn the control
knob to the "OFF" position.
Allow 5 minutes for any accumulated gas to
dissipate. If the side burner igniter will not
function, follow the match lighting instructions.
MATCH LIGHTING
1.
Hold a lit extended match or lighter near the
side burner ports.
2.
Turn the control knob counterclockwise
to the
"HI" setting.
3.
Rotate the control knob to the desired setting.
CARE & MAINTENACE
OF SIDE BURNER
BURNER CLEANING
Clean the exterior of the burner with a wire
brush. Clear any clogged burner ports with a
straightened paper clip. Never enlarge the
burner ports. Never use a wooden toothpick as
it may break off and clog the port.
SIDE BURNER GRATE
The top burner grate is stainless steel. To avoid
burns, do not clean the grates while they are hot.
While in place, they may be washed with hot,
soapy water, rinsed and wiped dry. Never
immerse hot grates in water.
STAINLESS STEEL
There are many stainless steel cleaners
available. Always use the mildest cleaning
procedure first, scrubbing in the direction of the
grain. Do not use steel wool as it will scratch
the surface.
To touch up noticeable scratches in the
stainless steel, sand very lightly with dry 100
grit sand paper in the direction of the grain.
15
Hide quick links:
Advertisement
Table of Contents
