Table of Contents
Advertisement
SIDE SHELF AND SIDE BURNER ASSEMBLY
Estimated Assembly Time: Approximately 10 minutes
Required Tools: Phillips Screwdriver (not included)
1. Open the grill lid and remove the side shelf from the fire box.
2. The screws used to attach the side shelf are already screwed into the side of the grill cart. Remove the
screws from the side panels.
3. Align the holes on the left side shelf with the holes in the grill cart. Insert the screws and tighten. Note: The
top two screws insert from inside the fire box while the bottom two screws insert from under the left side shelf.
Secure the top two
screws from inside the
fire box and the bottom
two screws from below
the side shelf.
1.
Open the grill lid.
2.
The screws used to attach the side burner are already
screw into the right side of the grill cart. Remove the
screws from the side panel.
3.
Align the holes on the right side burner with the holes in
the grill cart. Insert the screws and tighten.
4.
Align the side burner holes, and tighten all four screws
from underneath
the side burner.
Secure bottom screw from
below the side shelf front
panel and side burner
control panel.
9
Advertisement
Table of Contents
