Table of Contents
Advertisement
......... :.............. A djustment
Bolt
_!_:'WARNING
Burner adjustments should only be performed
after the burners have cooled.
Always tighten the locking nut before relighting
the burner.
If the flames are making excessive noise or
lifting, loosen the locking nut and turn the bolt in
a counter-clockwise direction.
Remember to tighten the locking nut before
relighting the burner.
If you have any questions
regarding flame stability, please contact
customer service at 1-800-554-5799,
'INSTALLER
FINAL CHECK
i.
Specified clearance maintained 24in. from
combustible materiatslconstruction.
2.
All internal packaging has been removed.
3.
The hose and regulator are properly
connected.
4. The unit has been tested and is free of leaks.
5. The gas supply shut off valve has been
located.
6. All burners are factory installed.
._i_
_ .WARNING
1.
Do not store spare LP gas cylinders under or near this appliance.
2.
Never fill the cylinder beyond 80 percent capacity.
3.
If the information above is not followed exactly, a fire resulting in death or serious injury could occur.
10
Hide quick links:
Advertisement
Table of Contents
