Frigidaire Tumble Action Washer Owner's Manual page 4

amportant Safety
instructions
(continued)
Avoid fire hazard or
electrical shock, Do not use an
adaptor plug or extension cord or
remove grounding prong from
electrical power cord. Failure to
follow this warning can cause
serious injury, fire or death,
Grounding type
wall receptacle
circumstances, cut, "_
remove, or bypass the J
grounding prong from]
this plug_ ,,,,,,,_j,
Power supply cord with 3-prong
grounding ptug
CORRECT
Use this way ONLY
Do not use or mix
liquid chlorine bleach with other
household chemicals such as toilet
cleaners, rust removers, acid or
products containing ammonia°
These mixtures can produce
dangerous fumes which can cause
serious injury or death.
Prevent injury
To prevent shock hazard and assure stability during operation, the
washer must be installed and electrically grounded by a qualified service person in
accordance with locatcodes, Installation instructionsare packed in the washer for
instatler'sreference Refer to INSTALLATIONINSTRUCTIONSfor detailed grounding
procedures ]f the washer is moved to a new location, have it checked and
reinstalled by a quafified service person
To prevent personal injuryor damage to the washer, the electrical
power cord of the washer must be plugged into a properly grounded and polarized
3-prong outlet. The third grounding prong must never be removed, Never
ground the washer' to a gas pipe, Do not use an extension cord or an
adaptor plug,
Follow package directions when using laundry products. Incorrect
usage can produce poisonous gas--resulting in serious injury or death
= Do not combine laundry products for use in t Ioad unless specified on the
label
• Do not mix chlorine bleach with ammonia or acids such as vinegar.
To prevent serious personal injury and damage to the washer':
• AU repairs and servicing must be performed by an authorized servicer
unless specifically recommended in this Owner's Guide Use only authorized
factory parts.
o Do not tamper with controls.
° Do not install or"store the washer where it will be exposed to the weather
• Do not install on carpet Install washer on a solid floor It may be necessary
to reinforce the floor to prevent vibration or movement
To reduce the risk of electric shock, disconnect this appliance from
the power' supply before attempting any user maintenance Turning the controls
to the OFF position does not disconnect this appliance from the power' supply.
To prevent injury, do not reach into the washer while parts are
moving. Before loading, unloading or adding items, push in the cycle selector knob
and allow the drum to coast to a complete stop before reaching inside.
[] Failure to comply with these warnings could result in serious personal injuries
[_ This washer is equipped with an electrical overload protector,. The motor wilt
stop if it becomes overheated, The washer will automatically restart after a cool
down period of up to 30 minutes, if the washer has not been manually turned off
during this time
SAVE THESE INSTRUCTIONS
Note: The instructions appearing in
this Owner's Guide are not meant to
cover every possible condition and
situation that may occur. Common
sense and caution must be practiced
when installing, operating and
maintaining any appliance.
4