Setting The Clock; Changing Oven Temperature Display (F° Or C°); Setting For Audible Or Silent Keypad Operation - Frigidaire LEEF3021MSA Use & Care Manual

Setting the clock
When the appliance is first plugged in or when the power
supply to the appliance has been interrupted, the display
will flash "12:00". It is recommended to always set the
clock for the correct time of day before using the appliance.
To set the clock:
1. Press clock set once (do not hold keypad down).
2. Within 5 seconds, press and hold the A or V until
the correct time of day appears in the display.
• Be sure to set the clock with the correct time of day
before using the oven.
• The clock cannot be adjusted when the oven is active
or during self-clean.
Changing between continuous bake
setting or 12-Hour Energy Saving feature
The oven control has a built-in 12-Hour Energy Saving
feature that will shut off the oven if the control is left on for
more than 11 hours and 59 minutes. The oven can be
programmed to override this feature for continuous baking.
Changing to continuous bake setting:
1. Press and hold timer on-off keypad for 5 seconds until
a tone sounds, "---- hr" will appear in display for
continuous cooking. The current time of day will return
to the display.
2. To cancel the continuous bake setting, press
timer on-off keypad and hold for 5 seconds until a
tone sounds. "12hr" will appear in display indicating
that the control has returned to the 12-Hour Energy
Saving feature.
Changing temperature display (°F or °C)
The electronic oven control is set to display °F (Fahrenheit)
temperatures by default when shipped from the factory.
The oven may be programmed to display °C (Celsius)
temperatures.
To change the temperature to display °C (Celsius) or
from °C to °F :
1. Press broil keypad. "----" appears in the display.
2. Press and hold the A until "HI" appears in the
display.
3. Press and hold broil keypad until °F or °C appears in
the display.
4. Press the _ or V to change °F to°Cor°Cto°F.
5. Press any control keypad to return to normal operating
mode.
The temperature display (°F or °C) feature cannot be
changed when the oven or clean is active.
Setting for audible or silent keypad
operation
Normally a beep will sound each time a keypad is pressed.
If desired, the control may be set for silent keypad
operation.
Press and hold the start time keypad. After 7 seconds, the
control will beep once. This will block the controls from
sounding when a keypad is pressed in the future.
To turn the silent control panel feature off, press and hold
start time keypad again for 7 seconds until the control
beeps once.
Changing between continuous bake or the 12-Hour Energy
saving mode will not change how the cooktop controls
operate.