Emptying The Container - Fedders 23-23-0466N-001 Installation, Operation & Maintenance Instructions Manual

Emptying the Container:
1. Unplug unit before removing container. Wait 3 minutes
for any remaining water to drain into the condensate
container.
2. Tilt the container forward; then lift carefully by the
handle.
3. Empty and gently re-insert the container.
Handle
\
Condensate
container
Z_ ..................... _IIIIZ ¸
Condensate drain
Filter Cleaning
1. Unplug unit.
2. Use a vacuum cleaner attachment or brush to clean the
front grille.
3. Remove the filter.
4. To clean the filter, wash in warm, soapy water, rinse and
shake dry.
Permanent Drain Installation (optional):
The condensate water can be removed directly from the
unit to a drain through a garden hose with the included
adapter.
1. Unplug unit before beginning work.
2. Use a screwdriver to remove the knock-out at the back
of the unit.
3. Slide the garden hose adapter (supplied) over the
condensate drain through the knock-out hole and
connect the garden hose to the adapter.
4. The garden hose should lead to a floor drain or other
appropriate drain source. The garden hose should have
no inclines or sharp bends.
Permanant drain
knock-out
Condensate
Drain
/
- l
Hose Adapter
Garden
Hose
To
floor
drain
j
Filter