Download Print this page

Fedders 23-23-0466N-001 Installation, Operation & Maintenance Instructions Manual page 3

Advertisement

Available languages

Available languages

Container Full
SetHumidity
Indicator
Display
Pause
Room Humidity/Temperature
Display
On
Full |
/
Set Humidity%
Room
High
Low
Fan
Fan
©
©
Room
Humidity
%
Room Temperature
Humidity
%
Power
/Temp
Fan Sp
d
Pause Feature
Fan speed Control
Operation
Power Indicator
Press "Power"
button
to activate unit. Power "On"
indicator
lights up. The unit is pre-set to maintain
a 60%
relative humidity
level.
Container
Full Indicator
An automatic
overflow
switch and Container
"Full"
indicator
light are provided to turn the dehumidifier
off
before the container
overflows.
When the indicator
light on
the control
panel glows, the water container
must be
emptied.
If the light remains on and the dehumidifier
does
not begin to operate
make sure the float is attached to the
water container.
Set Humidity
Display
If "Set Humidity"
level is lower than the "Room"
humidity
level: the compressor will start up and unit will start
dehumidification.
If "Set Humidity"
level is higher than the "Room"
level: the
unit will not dehumidify.
After operating
several days at the default setting, with
doors and windows closed, you may adjust the "Set
Humidity"
to a slightly
lower percent (drier air) or higher
percent (moist air). If you would like to adjust the "Set
Humidity"
humidity
level, press the "O
" or "O
" to
adjust the humidistat
in 5% increments
between 35% and
90%.
Room Humidity/Temperature
Display
The "Room"
display will display either the relative humidity
or temperature
of the room. The default setting
is room
humidity. To display the temperature
of the room press the
"Humidity/Temperature"
button.
Press it again to go back
to the humidity level.
To display the Temperature
in Celsius: hold clown the
"Humidity/Temperature"
button for 5 seconds.
Fan speed Control
Pressthe "Fan Speed" button
if you would like to change
the fan speed from "Low" to "High".
Use the high speed to
maintain
maximum water removal. The lower speed can be
used when quieter operation is desired.
Pause Feature
Press "Pause" button to pause operation of dehumidifier
for 1 hour.

Advertisement

loading