Using Convection Convert - Electrolux EW30DS75KS2 Use & Care Manual

Settin Oven Controls 25
Using convection convert
The conv convert option allows you to convert any
normal baking recipe using the convection bake
feature. The control uses the normal recipe settings
and adjusts to a lower temperature for convection
baking. Conv convert must be used with CONV
BAKE feature.
Benefits of conv bake using cony
convert option:
, Superior multiple oven rack performance.
* Some foods cook up 25 to 30% faster, saving
time and energy.
No special pans or bakeware required.
For best results
, When baking with a single rack use rack
positions 5. When using 2 racks use rack
positions 3 & 7. When using 3 racks use rack
positions 2, 5 & 8.
* Cookies and biscuits should be baked on pans
with no sides or very low side to allow heated air
to circulate around the food.
* Food baked on pans with a dark finish will cook
faster.
When placing multiple food items in the oven
allow 2-4" (5-10cm) of space between the food
items for proper air circulation.
NOTE
You may press CANCEL at any time when setting
the control or during the cooking process.
Setting convection convert
See the example below to set conv bake, starting
immediately with the auto-suggest (default) setting
of 350°F (176°C) and adding the conv convert
option.
Step Press
1 Press UPPER OVEN _PP_"
= OVEN
2. Press CONV BAKE r_
3. Press COOK OPTIONS @
4. Press CONV CONVERT
>_
5, Press START ¢
Once START is pressed the oven display shows
PRE-HEATING. After the oven reaches the
converted set temperature, PRE-HEATING will turn
off and a beep will indicate the oven is ready.
The added conv convert option will automatically
lower the set temperature you set from the bake
recipe to an adjusted conv bake temperature.
When conv convert is used with cook time, "CF"
(Check Food) wilt display when the cook time is
75% complete. The control wilt also beep at regular
intervals until baking has finished
To add or change any cook settings after this
feature has started:
, Select the UPPER oven. Make temperature
changes using the + or - keys. Each press of +
or - will adjust the temperature by 5 ° F ( or 2°C).
. If changing cooking times, select the cook time
or end time keys needed to make the changes.