Getting Started - Electrolux EW30DS75KS2 Use & Care Manual

1:2 Getting Started
Setting clock at power up
Timers
You will be prompted to enter the time of day in the
event of a power failure or when you first provide
electric power to your appliance.
, When your appliance is first powered up, 12:00
will flash in the display.
• Enter the time of day using the numeric key pads
and press START to set.
If an invalid time of day is entered, the control will
triple beep. Re-enter a valid time of day and press
START. tf CANCEL is pressed your clock will start
with the time set for 12:00.
Select the user pref key to modify the time of day
during other situations such as day light savings.
Wave=Touch TMdisplay modes
Sleep mode
Your control will remain in a sleep mode when not
in use. Only the clock will display during this mode.
"Youwill need to wake the control to begin any
function - Fig. t.
Awake mode
To awake the control touch within the display panel.
If the control panel is not touched again within 2
minutes, the control will return to the sleep mode.
To start cooking you must select either the upper
oven or the lower oven. User preferences wilt be
available during the awake mode as well as timers,
oven light and the control lock - Fig. 2.
The two timers provided with the oven control
serve as extra reminders in the kitchen. When a
timer reaches less than 1 hour, the display will start
to count down in minutes and seconds. When the
time runs out the active timer will beep, "0:00" will
flash.
The following time settings apply to the timers:
• Min. time: 1 minute
• Max. time: 11 hours 59 minutes
See example below to set the timer for 5 minutes:
Step Press
1. Press TIMER ,_,_
2. Enter 5 minutes
3. Press TIMER _)
To cancel after setting the timer, press the TIMER
key again.
NOTE
The timer(s) will not affect the cooking process.
Fig.1
Awake mode Fig2