Exmark Lazer Z Operator's Manual page 32

Refer to the charts and illustrations on the following pages
to properly adjust for desired cutting height.
FIG. 14
CASTER HEIGHT ADJUSTMENT
These models have five (5) axle positions; four (4) 1/2" caster spacers;
one (1) 3/16" caster spacer,
- 27 -
Axle Pivot Bolt
Place Jack
Here
Axle Adjustment Holes are actually
in the side of the rear deck.
FIG. 15
AXLE HEIGHT ADJUSTMENT
and four (4)
Axle
Adjustment
Holes
Pos. A
Pos. B
Pos. C
Pos. D
Pos. E
blade spacers.