Deck; Dimensions; Bolt Torque Requirements; Assembly Instructions - Exmark Lazer Z Operator's Manual

2.9.6 Cutting Height: Adjusts in 1/4" (.63 cm) or smaller
increments by various adjustments of caster spacers,
blade spacers and axle height, from 1" to 4 1/4"
(2.5 cm - 10.8 cm).

2.10 DIMENSIONS

2.10.1 Overall Width:
Discharge chute
down
Up
(transport only)
Overall Length
Overall Height
Tread Width∗ ∗ ∗ ∗
Curb Weight∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗
To outside of tires.
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
Weights will vary slightly depending on engine option.
♦ ♦ ♦ ♦ For Serial No.s 150,000 through 159,999.
◊ ◊ ◊ ◊ For Serial No.s 160,000 and higher.
2.11 TORQUE REQUIREMENTS
BOLT LOCATION
Blade/Cutter Housing Spindle Bolt ........ 75-80 ft-lbs.
Caster Bracket Mounts .................... 30-35 ft-lbs.
Cutter Deck/Engine Deck Mount ............ 30-35 ft-lbs.
Engine Mounting Bolts
Briggs & Stratton ................. 15-20 ft-lbs.
Kohler & Kawasaki ................. 25-30 ft-lbs.
Transmission Shifter Lever ............... 30-35 ft-lbs.

3. ASSEMBLY INSTRUCTIONS

3.1 Uncrate unit, leaving it on the pallet, place upper handle
assembly, fuel tank, and shifter lever at the rear of the
machine.
3.2 Place a length of 4" x 4" block between the front of the
cutter deck and the pallet.
3.3 Remove the bolt bag from the top of the fuel tank support.
3.4 Refer to Parts Manual to help you identify and locate parts
and their proper position.
32" 36"
42.45 in. 46.1 in.
107.8 cm 117.1 cm
32.75 in. 36.4 in.
83.2 cm 92.5 cm.
32" 36"
78 in. 78 in.
198.1 cm 198.1 cm
40.0 in. 40.0 in.
101.6 cm 101.6 cm.
32.05 in. 35.6 in.
81.4 cm 90.4 cm
374 lbs 391 lbs
170 kg 177 kg
Place casters at the front of the unit.
48" ♦ ♦ ♦ ♦
58.1 in.
147.6 cm
48.4 in.
122.9 cm
48" ♦ ♦ ♦ ♦
74.7 in.
189.7 cm
40.0 in.
101.6 cm
35.6 in.
90.4 cm
431 lbs
196 kg
TORQUE
- 8 -
48" ◊ ◊ ◊ ◊
58.2 in.
148.0 cm
48.1 in.
122.2 cm
48" ◊ ◊ ◊ ◊
73.0 in.
185.4 cm
40.0 in.
101.6 cm
35.6 in.
90.4 cm
439 lbs
199 kg