Kenmore 911.47704 Use & Care Manual page 21

CAREAND CLEANING
Self-C/eaning Cycle
The Clean Cycle, includingcool down
lime. offers preset options of 3.4, or 5
hours, bul you may change lt_is1oany
time between 3 and 5 hours
1.
For 3 hours: Press the
SELECT CLEAN pad, 3
hours and "Lo" will show
in the display This setting
is recommended tor small
contained spills Go to
step 3 and press the
START pad
For 4 hours: Pressthe
SELECT CLEAN pad two
times 4 hours and "Std" will
show in the display This
setting is recommended for
a normallysoiled oven Go
to step 3 and press the
START pad
For 5 hours: Press the
SELECT CLEAN pad three
times.5 hours and "Hi" will
show in the display This
setting is recommended
for heavily soiled ovens
Go to step 3 and press the
START pad
If you want to change the
length of clean time press
lhe HOURIMIN UP and/or
DOWN arrow pad
Press the START pad
Simpty press the CLEAR/OFF pad
You will need to wait for the oven
temperalure to drop betow the lock
temperature (approx 1 hour) before
attempting to open the door
21
After the cycle, you may notice some
white ash in the oven Just wipe it up
with a damp clott_ or sponge
If white spots remain, scrub them
with a soap-filled steel wool pad Be
sure to rinse thoroughly These are
usually deposits of salt lhal cannot
be removed during the cycle
If for any reason you are not
satisfied with the cleaning results,
just repeat the cycle.
1. Press the SELECT
CLEAN pad and
choose the
desired clean
level of either Lo
(3 hours), S_d(4
hours), or Hi (5
hours) !f one ol
these is your
choice, go to step
3 and set the
delay start lime
(_ @ 2, ifyouwantfo
change the length
M_N of clean time,
press the HOURI
c ,,'d.",,;_ MIN UP and/or
DOWN arrow
pads
& Press the DELAY
START TIME pad
@ @ 4_ Press the HOUR! MIN UP and/or
DOWN arrow
pads to set the
time you prefer the
_"%_';'_ clean cycle to
start
5,, Press the
START pad