Kenmore Power-Mate 1162561190 Owner's Manual page 7

CANISTER
I.Open the canister hood
2. Check to see that the dust bag Isproperly
Installed. See BAG CHANGING for instructions
3, Check to see that the motor safety filter is properly
installed See MOTOR SAFETY FILTERCLEANING for
tnstrucllons
HOOD
It is normal for the canister hood to come off when
opened further than needed Une up the hinges.
]nsed them, and close the hood to replace It,
HOSE
1.,Une up the hose
latch tab and notch
in canlster hood and
insert hose Into
canister until tt snaps
in piace.
To remove: lift hose
latch tab upward
and puIt up on hose-
2. Insert handle
into wand unlt_
tack button snaps In
place. Besure hose
is nottwisted,
To remove: press
handle release
button and pull up
on handle,
To store: To prevent stress on hose durhg storage,
disconnect hose from wands and canister, ,Store
hose in a loosely coiled position so the hose covering
is not stressed
CO_t