Motorsafety Filter Cleaning; Cleaning Exterior Andattachments - Kenmore Power-Mate 1162561190 Owner's Manual

MOTORSAFETY FILTER CLEANING
Check motor safety filter occaslonaIly and clean when dirty.
WARNING
Elec!rical Shock Hazard
Do no! operate the cleaner wilhout lhe motor safety
fl/ler, Be sure !he filler isdPyand properly Installed to
prevent meier failure and/or electrica! shock.
1. Unplug cord
from wall outlet
and remove bag
2, Pull out safety
filter as shown
3. Wash filter in
warm soapy water,
rinse,then dry
Do rot ctean In
dlsh_lasher.
4. Snap filter back
into canister.
5, liner bag
CLEANING EXTERIOR ANDATTACHMENTS
1, Unplug cord from wall outiet, DO NOT drip waler
On cleaner,
2. Clean exterior using a clean, soft cloth that has
been dlpped in a solution of mild tlqutd detergent
and water, then wring dry. Wipe dry after cleaning.
3, To reduce static electrlcily and dust build-up, wipe
outer surface of canister and attachments.
4. Wash attachmenls in warm soapy water, rtnse and
air dry DO NOT clean in dishwasher,
DO NOT USEATTACHMENTS IF THEYARE WET.
CAUtiON
Attachmen!s used In dlrty areas, such as under a
refrlgerc#or, should net be used on olhsr surfaces until
lhey ate washed.. They could leave marks,
13