Connecting The Power Cord; Once Connections Are Completed; Antenna Terminals; Turning The Power On - Denon AVR-589 Owner's Manual

&
©
2
7
o
5' i
7
...............
U_
An F-type FM antenna cable plug can be connected directly.
AM loop antenna
(supplied)
Direction of broadcasting station
FM antenna'_
_
,I
75 O/ohms
Coaxial cable
FM indoor
antenna
(supplied)
7
AM outdoor antenna
Ground
Q AM loop antenna assembly
Remove the vinyl tie and take out
the connection line.
Bend in the reverse direction.
Mount
a. With the antenna on top of any
stable surface.
b. With the antenna attached to a
wall.
Installation hole Mount
on wall, etc,
1. Push the lever. 2. Insert the conductor. 3. Return the lever.
=:> =_>
Note to CATV system installer:
This reminder is provided to call the CATV system installer's
attention to Article 820-40 of the NEC which provides guidelines
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building,
as close to the point of cable entry as practical.
Wait until all connections have been completed before connecting the
power cord.
Power cord __
.................... To household
power outlet
[_] [_] (AC120V, 60Hz)
o These outlets supply power to external
audio equipment.
oThe power supplied from these outlets
turns on and off together with the set's
power switch.
o Audio equipment with a total power
consumption of 120 W (1 A) can be
connected.
o Insert the AC plugs securely. Incomplete connections could cause
noise.
o Only use the AC outlets to plug in audio equipment. Do not use
them as power supplies for hairdryers or anything other than audio
equipment.
15