Surround Parameter; Adjusting The Parameters - Denon AVR-589 Owner's Manual

©
5'
Button located on both the main unit and the remote control
unit _ BU'_ON
Button only on the main unit >- <BUT[ON>
MULTEQ <SURR. PARA> AV
[Front]
[Rear]
RESTORER <DYN VOL.> <]D
AV<1D -
[DYNAMIC_
VOLUME]
- [NIGHT]
= MULTEQ
= RESTORER
[CINEMA] _i :
[MUSIC]
AV<1D
V Press <SURR.PARA> 0r [PARA]0
Parameter is displayed.
Use A _ tO select which Parameters to adjust,
On!Y those parameters which Can be adjusted under the current
playbaCk Status are displayed.
_3 To exit adjustment
* Press <SURR. PARA> or [PARA] during adjustment.
* If no adjustment is made for a period of about 5 seconds, the
adjustments made up that point are registered and the AVR-S89
returns to the original mode.
The parameters (items) which can be adjusted differ
depending upon the foJJowing conditions.
* Whether an input signaJ is present (when pJaying) or not
(when stopped, etc.}.
* The type of input signaJ
* The type of surround mode
For detaiJs of which parameters can be adjusted in each
surround mode, see "Surround Modes and Parameters"
(L_=_page 47, 48}.
[] Mode
[] Cinema EQ
I[q D. Comp (Dynamic Range Compression)
[] LFE
[] Center image
[] Panorama
[] Dimension
_J Center Width
[] DelayTime
[] Effect LeveJ
[] Room Size
[] SW ATT (SubwooferAttenuation)
[] Subwoofer
[] Tone Control
[] Bass
[] Treble
m MuitEQ
[] Dynamic EQ
[] Dynamic VoJume
[] DV Setting (Dynamic Volume Setting)
m RESTORER
m Night Mode
_J DefauJt
29