Connecting The Monitor; Connecting The Playback Components; Dvd Player - Denon AVR-589 Owner's Manual

&
©
2
7
o
5'
7
©
U_
Select the terminal to use and connect the device.
CZZZZ3
CZZZZ3
VIDEO
HDMI
IN
*The AVR-589 supports four video input formats:
HDMI, component video, S-video and video.
Because video signals are output from the AVR-
589's monitor output terminal in the same format
as the video input signals, the monitor output
terminal should be of the same type as the
terminal used for input.
=The component video connectors may be
indicated differently on your monitor. For details,
see the monitor's operating instructions.
oTo play the sound by AVR-589, make analog or
digital audio output connections to AVR-589's
audio input connectors.
[Flow of video signals inside the AVR-589]
High picture
quality playback HDMI connector
HDMI connector
Y Ps/CB PPdCR Y PB/CB PR/CR
Component video
connectors
Component video
connectors
S-Video connector S-Video connector
Video connector
Video input terminals
Video connector
Monitor output
terminals
J
Monitor
Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect
correctly.
Select the terminal to use and connect the device.
DVD player
AUDIO
i
HDMI
OUT
The audio signal input to
the HDMI input connector
cannot be played on the
AVR-589. Input the audio
signal to the digital audio
input connector or analog
audio input connector.
The same method can be used to connect an HDP (High-Definition Player) such as a Blu-ray Disc
player.
o When using an optical cable for the digital audio connection, make the settings at "System Setup"
- "Input Setup" - "Digital In Assign" (_page 24).
Because video signals are output from the AVR-S89's monitor output terminal in the same format as the
video input signals, the monitor output terminal should be of the same type as the terminal used for
input,
11