Kenmore 1163511290 Owner's Manual page 8

AND POWERLEVELSELECTION
ON/OFF SWITCHHANDLEMOUNTED
(SOME MODELS)
To start the
vacuum cleaner,
slide the On/Off
Switch from the
OFF position to the
ON position. To
stop the vacuum
cleaner, slide the
On/Off Switch to
the OFF position.
BODY MOUNTED
(SOME MODELS)
To staff the
vacuum cleaner,
put the switch on
the top of the
body in the ON
position. To stop
the vacuum
cleaner, put the
switch in the OFF
position.
OnlOff _ I
_T Handle
ATTACHMENTS
Identify each of the attachments shown below.
Crevice
Telescopin!
Wand
Dusting
Brush Stretch Hose
Upholstery
Tool --
Hose
Collar
TO USEATTACHMENTS:
Remove the lower end of the stretch hose from the
cleaner by grasping the hose collar, twisting and
pulling straight up.
NOTE: Brush
assembly stops
revolving and the
headlight goes off
when hose is
removed.
Hose
Collar
WARNING
Personal Injury Hazard
Always unplug vacuum before placing hands
near brush assembly as brush may suddenly re-
start. Failure to do so could resultin injury.