Kenmore 911.95361 Owner's Manual page 15

OVENCOOKINGTIPScontinued
You may feel that your new oven cooks
differently than the oven it replaced. We
recommend that you use your new oven a
few weeks to become more familiar with it,
following the times given in your recipes as
a guide. See Do It Yourseff Temperature
Adjustment in the back of this manual, if you
feel your oven is too hot or too cool for your
cooking preference.
Your new range is equipped with a Self-Clean
Door lock handle (used for self-clean only).
1
2.
• PREHEATED Indicator Light
turns on and stays on when oven has
reached selected temperatures.
• OVEN ON Indicator Light -- turns
on and stays on when bake, broi!, or
clean function has been chosen.
• LOCKOOORIndicatorLight--tums
on for self-clean. If the LOCK DOOR
Indicator Light flashes you should check
for one of the following:
The latch handle is locked during a baking
function.
The latch handle is not locked during a
self-clean function.
Never lock during baking or broiling.
OVEN
ON
©
LOCK
©
©
PRE-
HEATED
B
2.
3.
Turn the OVEN CONTROL KNOB to
selected temperature from WM to 550_F.
The "OVEN ON" indicator hght will glow.
When the oven has reached the selected
temperature the "PREHEATED" and
"OVEN ON" indicator lights will glow.
Place food in the oven.
4. The "PREHEATED" and "OVEN ON"
indicator lights will remain on until baking is
complete and the control knob is tumed to
the OFF position.
During the baking function you may hear
clicking. This is normal. The oven heating
elements cycle on and off to maintain the
selected temperature.
Your oven control has a selector knob for
choosing BAKE, BROIL, orCLEAN. There
are also three indicator lights.
15