Table of Contents
Advertisement
Available languages
Available languages
i
,::::::
....:
;;:::::::
_
::_::::
:::::::::::
::::
::: :: : _
_
_: _ :: _
:
.:.:?:._:::T:.::,_:.:::.:.:::T:.:.:::.:.:.::T:,-:-:'::':
'¸ ::::.:.:.:.:::..:.:.::::.:::::T:T..T:T:T;.:.::!.:.:::---:-:.:.:._.::::::
¸ --:::::.:.:.:i:::
-:|
I
Review this chart to find do-it-yourself
solutions
for minor performance
problems.
Any service
needed, other than those described
in this owner's manual, should be performed
at a Sears
service center,
so could result in electrical shock or personal
injury.
Cleanerwonl run.
Poorjob of dirt pick-up.
Cleaner picks up
moveablerugs or
pushestoo hard.
Agitatordoes notturn.
Performance indicator,
somemodels, i s red.
Air flow restricted
witt_attachmentuse.
Sound changes.
1. Unplugged at walt outlet.
2, Tripped circuit breaker/blown fuse
at household service panel.
3. On/off switch not turned on.
4, Thermal protector tripped.
1. Full or clogged duel bin.
2. Wrong pile heightset_ng.(some models
3. Worn agitator.
4. Clogged nozzle or dust bin port.
5. Clogged hose,
6. Hole in hose.
7. Broken/misplaced bell.
8. Hose not inserted fully.
9. Motor protectionsyslem activated,
10. Dirty filters.
1. Wrong pile heightsetling.(somemodels)
1. Broken bell.
2, Belt installedincorrectly.
1, Full or clogged dust bin.
2. Dirty fillers.
3. Clogged airflow passage.
4. Cerlale altachment tools.
1, Attachment use restricts air flow.
2, New carpel fuzz clogged
air path.
1.
Plugin firmly, push on/off switch to on.
2.
Reset circuit breaker or replace fuse.
3.
Push on/off switch to on.
4.
Reset thermal protector, (page 11)
1.
Clean dust bin, (pages 13, 14).
2.
Adiusl setting, (page 7).
3.
Replace agitator, (page 19)
4.
Check CLOG REMOVAL, (page 18).
5.
Check for clogs, (page 18).
6.
Replace hose.
7.
Replace/fix belt, (pages 16, 17).
8.
Insert hose fully, (page).
9.
Check for clogs. (page 18).
10.
Clean/change filters, (page 15).
1.
Adjustsetting, (page 7).
1,
Replace belt, (pages 16, 17).
2.
Check BELT CHANGING
AND
AGITATOR CLEANING, (pa_les 16.17).
1,
Clean dust bin, (pages 13, 14).
2.
Clean/change tilters. (page 15).
3.
Clear clog from airflow passage,
(page 18).
4.
This is normal, Light should go off
when tool is removed.
1,
Check ATTACHMENTS,
(page 9).
2.
Check CLOG REMOVAL and clean
hose. (page 18).
20
Advertisement
Table of Contents
