Table of Contents
Advertisement
O
0
0
0
BLIND
HEMMING
1. Fold material
and baste hem.
2.
Make second fold overlapping basting as shown.
3.
Straight stitch for approximately
_ inch, then zigzag one
stitch
using black #3
stitch
width
position,
catching
second fold as shown. Continue this procedure until hem
is completed.
4.
Unfold,
exposing
right side of material
with completed
blind stitching.
Remove basting and press hem.
SEWING
ON BUTTONS
I, Turn feed dog control to left. Place needle into left hole of
button,
align
holes with
slot of presser foot
and lower
presser foot.
2.
Set stitch width control
at width between
holes of button.
Test width
by turning
handwheel
slowly.
Take several
zigzag stitches
to sew on button,
ending
with
needle on
left side.
.
Set stitch width control at the red dot. Take a few stitches
in left hole of button to lock threads.
Pull threads to wrong side,
NOTE: To make a small thread shank when sewing on a flat
button,
place a straight pin or needle between
the
holes of the button.
25
Hide quick links:
Advertisement
Table of Contents
