Kenmore 1218 Instructions Manual page 22

22
.'--E
l-
I-
F
Stitch Stitch Feed Dog
Width Length Control
I
Fig. 1
Fig. 3
BUTFONHOUNG
SETTINGS:
Stitch Width Control -- 1 H in black
Stitch Length Control -- Between 24
and white dot
Feed Dog Control - Up
Satin Stitch Foot
1. Mark the buttonhole length at both ends and also the
center line. See Fig. 1.
2_
Position fabric under needle. The first stroke of the needle
should be to the right and pierce fabric at point A. Stitch
forward on left side of buttonhole until desired length is
obtained. Sto p with needle in fabric on right side of
stitching. Point B. See Fig. 2.
3. Raise presser foot and turn material and set stitch width
control to three. Lower presser foot and take one stitch to
the left manually. Point B to C. See Fig. 3.