Kenmore 1218 Instructions Manual page 11

Fig.I
Fig. 2
THREADING UPPER MACHINE
Place thread on spool pin as shown with the thread coming from the back of the
spool. Guide thread into top thread guide A as shown in Fig. 1 and Fig. 2.
Holding the spool with the right hand pull thread between tension discs as shc_wn
in Fig. 3.
Pull the spring wire loop up and past the top hook until the thread can be slipped
into the hook. Release the spool and the spring loop will return to position for
sewing, Fig. 4.
Continue to thread mschine through guides as illustrated, Fig. 5. Thread needle
from left to right, Fig. 6.
Fig. 3 Fig. 4 Fig. 5 Fig. 6
11