Advertisement
Available languages
Available languages
PROBLI_M
CAUS_:D BY
SOLUTiOH
Dishes not dry
,,Water is not hot
Spotting and
filming
,COOL
DRY option
selected
oImproper loading
,,Rinse agent
dispenser
empty
, Hard water
,,Water is not hot
,COOL
DRY drying
option selected
,,Not enough or
poor quality
detergent
oOtd detergent
°No rinse agent
oRaise water heater thermostat
to 140°F if
necessary..
oDo not select COOL DRY drying option. Allow
dishes to dry in heated air.
,Load dishes so items drain properly.. Avoid
overloading°
-Fill rinse agent dispenser
if empty°
_Fill detergent cups to capacity. Use dishwasher
detergent with highest available phosphorous
content, May be necessary to install a water
softener..
=Raise water heater thermostat
to 140°R
, Drying without heat may cause some
spotting. Do not select COOL DRY option.
-Use more fresh automatic
dishwasher
detergent° Use detergent
with highest
available phosphorous
content,
especially if you have hard water.
• Use only fresh, automatic
dishwasher
detergent. Store tightly closed in a cool, dry
ptace_ Discard old, lumpy or separated
detergent,
Do not fill detergent
dispenser
until ready to wash,
-Fill rinse agent dispenser.
To remove stubborn
spots and film from
glassware:
1. Remove all metal utensils from the
dishwasher.
,
3_
4.
Do not add detergent,
Select POTS PANS cycle,
Start the dishwasher and allow to run for .
t8 to 20 minutes. The dishwasher
will now
be in the main wash°
5. Then open the door and pour 2 cups
(500 ml) white vinegar into bottom of
dishwasher.
6. Close the door and allow to complete the
cycler
if vinegar rinse doesn't work:
Repeat as
above, except use 1/4 cup (60 ml) of citric
acid crystals instead of vinegar. (Most
drugstores
carry citric acid crystals.)
16
Advertisement
