Advertisement
Replacement
and Care of Filters
C.
d.
Spring Tabs
e,
Install new filters in the filter housing
track with the glue beads of the wick-
ing pad to the inside of the filter hous-
ing.
Return the top cover
of the filter
housing by installing the cover over
the fixed tabs on the rear of the lower
filter housing and pivoting the cover
down over the topof the filters. Snap
the cover over the two spring tabs.
Replace the filter housing in the cab-
inet. Note: There is a left and a right
filter housing. There is also a front
and back orientation. To position the
filter housings correctly:
• Make sure the two indents in the
cylinder section of the top covers are
positioned towards the center of the
cabinet,
Front of
Humidifier
(continued)
i :
Fixed Tabs
Fiker
Rear of
Humidifier
• Be sure that the spring tabs of filter
housings are towards front of cabi-
net.
• Align the lower portion of the filter
assembly over the six ribs located at
the bottom rear of the humidifier cab-
inet,
Top
Cover
\
Indents
Towards
Center of
Cabinet
f.
Position fan assembly onto the cabi-
net, Make sure the fan venturi (low-
est cylinder section below the fan) is
placed inside the filter housing.
g. Replace water bottles.
h_' CloSe the pivoting lid.
::it
:The Unit is ready for, use orl t° be
: :_ stored away for next seaso n.
Flat Portion of Filter Housing
Towards Back of Cabinet
NOTE:::: Foi _Oit_ ct: operation: of the fiter
housing assembly, fitters must be fully con-
:tair!e d inside t,e flange: of the toP cover,
i
=
•
:i:¸ :
:: i-
Indents Toward Center of Cabinet
Step 4 e.
10
Advertisement
