Oven Cleaning - Kenmore 790.79992100 Use & Care Manual

Oven Cleaning
(continued)
D
8
D
D
Q OVEN
PREHEAT
I LOCK
Q U
Q Q
_ Use care when opening
the oven door after the self-cleaning
cycle° Stand to the side of the oven
when opening the door to allow hot air
.or steam to escape.
DO NOT force the oven
door open.. This can damage the
automatic door locking system. Use
caution when opening the door after
the self-cleaning cycle is completed.
The oven may still be VERY HOT.
*We recommend a 2 hour self-clean cycle for light soils and a 3 hour cycle
for average to heavy soils (to assure satisfactory results).
To Set the Controls for a Self-Clean Cycle:
1, Be sure the clock shows the correct time of day,
2, Push _ " "appears in the display,
3 Push the _ until "3:00" appears in the display for a 3 hour cycle, or
push the (_ until "2:00" appears in the display for a 2 hour cycle
4 As soon as the (_ or (_ is released, "CLn" appears in the display.
5 As soon as the controls are set, the motor driven lock wilt begin to close
automatically and the "LOCK" indicator light will flash. DO NOT open the
door while the light is flashing (it takes about 15 seconds for the lock to
close)
6, The "LOCK" light will glow until the cleaning cycle is completed or
cancelled, and the oven temperature has cooled.
When the Self-Clean Cycle is Completed:
1. The time of day wil! appear in the display window and the "LOCK" light will
continue to glow.
2 Once the oven has cooled down for about 1 HOUR and the "LOCK" light
has gone out, the oven door can be opened.
If it becomes necessary to step or interrupt a self-cleaning cycle due to
excessive smoke or fire:
1_ Push _,,
2 Once the oven has cooled down for about 1 HOUR and the "LOCK" light
has gone out, the oven door can be opened.
3, Correct the condition which caused the smoking.
4 Restart the se_f-ctean cycle once all conditions have been corrected.
I 5