Setting Oven Controls; Setting The Clock; Changing Between 6-Hour Energy Saving Feature; Or Continuous Bake Setting - Frigidaire FPEF3081MFA Use & Care Manual

Setting the clock
When the appliance is powered up for the first time or when
the electric supply to the appliance has been interrupted, the
display will flash "12:00" (Fig. 1).
Fig. 1
Fig. 2 Fig. 3
To set the clock for 1:30:
Step
1. Press set clock.
2. Enter 130.
3. Press start to accept.
1
Press
set
cl.ock
30
start
• Be sure to set the clock with the correct time of day
before using the oven.
• The clock cannot be adjusted when the oven is active
with any cooking function or during self-clean.
Changing between 6-Hour Energy Saving
or continuous bake mode settings
The oven control is factory preset with to the 6 Hour Energy
Saving mode that will automatically turn the oven off after 6
hours. The control may also be programmed to override
this feature to continuously bake.
To switch between 6-Hour Energy Saving or
continous bake modes:
Step Press
1. Press and hold timer on • off Umer
on. off
for 6 seconds.
2. Press self-clean self
clean
to toggle between "6 Hr OFF"
(Fig. 2) or "STAY On" (Fig. 3)
and release keypad.
3. Press start to accept, start
Changing between the 6-Hour Energy Saving or
continuous bake mode will not change how the cooktop
controls operate.
Setting 12 or 24 hour display mode
The oven control is factory preset to show the time of day
with a 12 hour clock. This setting may be changed to
provide the time of day with a 24 hour clock.
To set 12 or 24 hour display mode:
.
Step Press
Press and hold set clock set
dock
for 6 seconds.
2. Press self-clean self
clean
to toggle between "12 Hr dAY" or
"24 Hr dAY" display modes
(See Figs. 4 & 5) and release
keypad when the mode you prefer
is displayed.
3. Press start to accept, start
Fig. 4 Fig. 5