Table of Contents
Advertisement
Getting
started
You can enhance the sound quality
by connecting
either of the unit's DIGITAL OUT jacks to the digital input of an
amplifier,
etc. by using an optical or a coaxial digital cable (optional).
The digital audio signal from a disc is directly
transferred.
If you connect the unit to a Dolby Digital or DTS decoder or an amplifier
with a built-in
decoder by using an
optional
digital cable, you can enjoy high-quality
surround
sound.
For digital connection,
connect the unit's DIGITAL OUT (OPTICAL or COAXIAL) to the digital input of digital audio device
using an optical or a coaxial digital cable.
The unit
PC_JSTREAI
The OPTICAL jack is protected
by the hinged cover.
To connect the optical cable to the jack, press the cover with the plug and connect it
to the jack inside in the correct direction.
Coaxial digital cable (not supplied)
!
Optical
digital
cable
(not supplied)
Digital equipment
White
Audio cable (supplied)
J.
Red
Note that the DIGITAL OUT jacks on the unit have been designed
and equipped
exclusively
for enjoying
the digital
surround
sound playback through
the unit. It is not recommended
to use the jacks for digital dubbing.
When recording
the sounds (DVD AUDIO, DVD VIDEO, SVCD, Video CD, or Audio
CD) played back on the unit, record them through
the
analog jacks (in this case, set "ANALOG
OUT" in the "AUDIO"
preference
display to "2-CH STEREO") (see page 65).
NOTES
• When you connect the unit's DIGITAL OUT to a digital audio device, before using, set "DIGITALAUDIO OUTPUT" in the
"AUDIO" preferencedisplay correctly accordingto the connected audio device. If "DIGITAL AUDIO OUTPUT" is not set correctly,
loud noise may be
generated
from
speakers,
causing
damage
to them. See "DIGITAL AUDIO OUTPUT" on page 64.
• When you connect the unit's DIGITAL OUT to a Dolby Digital or DTS decoder (or amplifier with a built-in decoder) to enjoy
surround sound,the unit's "D. RANGE COMPRESSION" setting in the "AUDIO" preference display is invalid. Make appropriate
surround audio
settings
on
the decoder.
• If your digital audio device has an AV COMPU LINK terminal, you can use the AV COMPU LINK function. See "AV COMPU LINK
remote control
system"
on
page 75 for details.
10
Advertisement
Table of Contents
