Table of Contents
Advertisement
Basic operations
When
the resume
mode
is set to "DISC
RESUME"
• While stopped, or no disc is inserted
1 Press_A0PEN/CLOSE to insert a disc whose interrupted position is
memorized.
After loading the disc, the display window
on the front panel shows "----
RESUME"
(DVD AUDIO/DVD
VIDEO) or "--RESUME"
(SVCD/Video
CD) and
"RESUME STOP" appear at the bottom
of the opening
display.
If a disc for which you want to resume playback
is already set in the disc tray
carousel,
you need not to follow
this step.
2 Press
Available
:
The display window
shows "RESUME
PLAY" and the unit resumes playback from the position
you interrupted
playback.
The unit keeps the memory
for the position
on a disc where you interrupted
playback, even though
you remove the
disc from the disc tray carousel and set it back again.
Of course, the unit keeps the memory
when the disc remains
in the disc tray since the last playback.
To play back a disc from the beginning (instead of the interrupted position)
After loading the disc, press • before pressing
I_ to start playback.
Pressing • while the disc is stopped
clears the memory
for the interrupted
position.
Every time you interrupt
playback, the position
is memorized
as the "resuming"
point.
When
the resume mode is set to "ON"
• While the disc you interrupted
playback last time*
is still on the disc tray (*by pressing
•).
Press _,-.
The display window
shows "RESUME
PLAY" and the unit resumes playback from the position
you interrupted
playback.
If you press I_ then •, the unit starts playback after the display window
shows "RESUME
PLAY."
Note that you cannot resume playback if you interrupted
playback
last time by opening the carousel or turning
off
the power.
•
To play back a disc from the beginning (instead of the interrupted
position)
Carry out any of the followings:
* Press • while stopped, then press _.
* Turn off and on the unit by pressing
DVD STANDBY/ON
O/I on the remote control unit or STANDBY/ON
(_/I on the
front panel then press _.
NOTES
• If you change the "RESUME"
setting on the "OTHERS"
preference display to "OFF" or "ON"
from "DISC RESUME,"
you cannot
resume playback of a disc whose
"resuming"
position is memorized.
However, if you again set "RESUME"
to "DISC RESUME,"
you can resume playback of the disc.
• If you open the carousel with the RESUME mode set to ON, the "resuming"
point clears.
• The resume function cannot be performed
with Audio CD, MP3 and JPEG discs.
• In the case of an SVCD/Video
CD disc with
PBC function, the unit may resume playback from a point slightly earlier or later
than the point you interrupt playback last time.
• The unit may not resume playback exactly from the interrupted
point, depending on the point.
• For a double-sided
DVD AUDIO/DVD
VIDEO disc, the unit regards each side as a different disc. Therefore, when resuming
playback of such a disc, make sure to set the disc with the resumed side down.
• When the unit memorizes the interrupted
point of a disc, it also memorizes
Audio, Subtitle and Angle settings (regardless of
whether
"RESUME"
is set to "DISC RESUME" or "ON").
• If you interrupt playback while the menu for a DVD AUDIO, DVD VIDEO, SVCD or Video CD is shown on the TV screen, the unit
may not memorize the interrupted position correctly, regardless of whether
the "RESUME"
mode is set to "ON"
or "DISC
RESUME."
23
Advertisement
Table of Contents
