Compu Play; Automatic Power On - JVC FS-X3 Instructions Manual

g
Ge_mgS_ed
Connecting an MD Recorder, etc (Optical Digital Output)
Unplug the cap and connect an optical digital cord (not supplied) between the System's OIVI'ICAL DIGITAL OUT terminal
and the input terminal of the MD recorder, etc.
You can record the digital output signal from the System's CD Player to the MD recorder, etc.
Optical digital cord
(not supplied)
OPTICAL
DIGITAL OUT
MD recorder, etc
I (not supplied)
I I
COMPU PLAY
JVC's COMPU PLAY feature lets you control the most frequently used System functions with a single touch.
With One Touch Operalion you can play a CD, turn on the radio, or listen to an external equipment with a single press of the
play button for thai function. One Touch Operation turns the power on for you, then starts the function you have specified. If
the System is no1 ready (no CD in place), the System still powers on so you can insert a CD.
How One "I_uch Operalion works in each case is explained in the section dealing with thai function.
The COMPU PLAY buttons are:
On the Remote Control
CD I_-/II button
FM/AM button
LINE button
Automatic Power On
The System aulomatically turns on with the following operation.
• When you press the A CD button on the Unit or the CD DOOR A button on the Remote Cootrol, the System automatically
turns on and the CD door opens to allow CD selting, However, this operation does not change the source to CD,
When you press the STANDBY/ON d_/I button to turn off the System, the CD door will be aulomatically closed if it is
opened.
9