JVC FS-X3 Instructions Manual page 16

!
FM/PLAYMODE
Source
PM mode indicator
irll I _ i" ,, _ i_,i I
I
Band dispEay,Preset channel,
Frequency displa7
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
button
You can listen to FM and AM stations. Stations can be tuned
in manually, automatically, or from preset memory storage.
Before listening to the radio:
• Make sure that both the FM and AM antennas are cor-
rectly connected. (See pages 5 and 6).
Setting the AM Tuner Interval Spacing
When shipped, the AM tuner interval is set Io 9 kHz or I0 kHz
spacing (Initial setting: 9 kHz except for Soulh and Central
America). You can change it to I0 kHz or 9 kHz spacing.
To select 10 kHz intervals, while holding down 1he
button on the Unit in Standby mode, press the STANDBY/
ON _)/I button on the Unit Io turn on the power. "AM
10kHz STEP" will appear on the display.
TO select 9 kHz intervals, while holding down the
button on the Unit in Standby mode, press the STANDBY/
ON €_)/I button on the Unit to turn on the power. "AM 9kHz
STEP" will appem" on the display.
+
(9 kHz interval) (10 kHz interval)
• Whenyouchangethesetting, thepresetAMstationsare
erased You will need to preset the station again. (See
page 14.)
One Touch Radio
Just press the FM/AM button on the Remote Control to turn
on the System and start playing the station you were l&st
tuned to.
You can switch from any other sound source to the radio
by pressing the FM/AM button.
Tuning In a Station
1
Press the FM/AM button.
The Band and Frequency you were last tuned to appear
on the display.
(If the last station was selected using the preset number,
the preset number appears first.)
Each time you press the button, the band alternates be-
tween FM and AM.
• You can also select the band by turning the Source
seleclor on the Unit.
m
FMIi_t
FM _ AM AM FM
(On the Remote Control) (On the Unit)
2 Select a station using one of the follow-
ing methods.
• Manual Tuning
Press the _ or _ button on lhe Unit or the • or
• button on the Remote Control repeatedly lo move
from frequency to frequency until you find the station
you want.
OR
• Auto Tuning
If you press anti hold lhe _ or _ button on the
Unit or the • or • button on the Remote Control
for one second or more, the frequency changes up, or
down, automatically until a station is found.
OR
13