Table of Contents
Advertisement
SETTING
OVEN CONTROLS
SETTING
QUICK
PREHEAT
Use the quick preheat feature when using single rack
baking to q uickly heat the oven to bake temperatures.
Use
this feature only for standard baking. A reminder tone will
sound indicating when to place the food in the oven.
When the oven is finished preheating
quick preheat will
become just like the bake feature and continue to bake
until cancelled.
To set the quick preheat
with an oven temperature
of 375°F
1.
Arrange the interior oven racks.
2.
Press UPPER or LOWER to select oven.
3.
Press QUICK PREHEAT. "350" will appear in the display.
If a preheat of 350°F is needed, press START.
4.
Press3 7 5.
5.
Press START. _'PRE" will be displayed while the oven is
preheating.
NOTE
While in preheat mode, the convection fan (upper oven
only) will be activated during the first rise of temperature
to allow the oven to reach its target temperature
faster.
The Bake, Broil and Convection (upper oven only)elements
will also cycle for a better heat distribution.
SETTING
BAKE
The BAKE pad controls normal baking. If a rapid preheating
is preferred,
refer to the QUICK
PREHEAT feature for
instructions. The oven can be programmed to bake at any
temperature
from 170°F to 550°F.
Baking
Tips:
- Preheat your oven before using the bake mode.
• During
preheat,
the
bake,
broil elements
and the
convection fan and element (upper oven only) are used
in cycle to quickly heat the oven.
, Use only one rack and center the pans as much as
possible with racks in position 2 or 3.
- If using two racks, place time oven racks in positions 2
and 3.
, Allow 2" to 4" (5,1 to I0,2cm)
around the utensil(s) for
proper air circulation.
• Be sure the pans do not touch each other, the door,
sides or back of the oven.
To set the Bake Temperature
to 375°F
1.
Arrange the interior oven racks.
2.
Press UPPER or LOWER to select oven.
3.
Press BAKE,"350"
will appear in the display. If a bake
of 350°F is needed, press START.
4.
Press 3 7 5.
5.
Press START. Timeactual temperaturewill
be displayed.
A beep will sound once the oven temperature
reaches
375°F and the display will show "375 °',
6.
Place food in the oven.
NOTE
Pressing CANCEL will stop the feature at any time.
To change
the
Bake Temperature
(example:
changing
from 375°F
to 425°F)
1.
Press UPPER or LOWER to select oven.
2.
After the oven has already been set to bake at 375°F
and the oven temperature needs to be changed to 425° F,
press BAKE and "375"
will appear in the display.
3.
Press 4 2 5. "BAKE" will continue to flash and "425 °,,
will appear in the display.
4.
Press START.
The
actual
temperature
will
be
displayed.
NOTE
During the first rise of temperature,
the convection fan
(upper oven only) will be activated to allow the oven to
reach its target temperature
faster. The Bake, Broil and
Convection (upper oven only) elements will also cycle for
a better heat distribution.
17
Advertisement
Table of Contents
