Cycles - Jenn-Air JDB1250AWW Use & Care Manual

Choose the cyclethat bestdescribes yourdishloadby pressing the corresponding t ouchpad. ( Seepage2,
OperatingTips,for howto beginthe cycle[}.
i i iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiili ¸_:_U_:__
Heavy Wash Long cycle for heavy food soils. 131 2 washes/3 rinses
Medium cycle for average food
Norma_ Wash soils. ClearScan" Turbidity 97-118 1-2 washes*/I-2 rinses*
sensor is active with this cycle.
China/Crysta_ Short cycle for light food soils. 82 2 washes/1 rinse
Sensor C_ean
(select mode_s[}
Designed to select the number
of water fills best suited for the
soil level of each load. ClearScan '_
Turbidity sensor is active with
this cycle.
97-131
1-2 washes*/1-3rinses _
Rinses dishes being held until 9 1 rinse
Rinse Only there is a full load.
Quick Wash Quick cycle for light food soils. 38 1 wash/1 rinse
{:seJect _odeJs} Does not include drying time.
Number of fills will va_7dependh_g on the soil levelof each Goad.
Depending on water temperature, there may be time added to the cycle to bring water up to temperature.
Cycle times shown in the numerical display (select models:) will increase or decrease, based on each load's soil
level, water temperature and selected options.
Only the following certified cycles have been designed to meet NSF requirements (NSF/ANSI 184 Residential
Dishwashe0 for sanitization: Sensor Clean (select models:), Heavy Wash, Normal Wash and China!Crystal.
IO