2-Rack Loading; 10 Place Setting Load; Upper Rack - Jenn-Air JDB1250AWW Use & Care Manual

(SELECT MODELS)
10 Place Setting Load
Upper Rack (Models with
folding and convertibJe bow_
tines in the lower rack)
Upper Rack
Glasses, cups, stemware, light-weight plastics, plates,
bowls, pans, long-handled utensils etc. can be loaded
in this rack. Do not moad
glasses over the tines.
The Stack-Rack (select
models] on the right side
of the upper rack folds
up or down for loading
flexibility. Fold it down to
hold long-handled knives, spatulas and spoons or
short items like cups or juice glasses. Fold it up for
taller items like glasses, bowls, plates, etc.
The edge of the Stack°
Rack (select models} is
designed to hold
stemware in place. Taller
stemware will fit better on
the right side as the
upper rack is deeper on
this side.
The J:olding Tines (select
models] located in the
front right corner provide
convenient loading space
for large, bulky items like
pots and pans or mixing
bowls.
To lower tines, carefully push the tines out of each
holder toward the center of the rack and lay the tines
down.
The Cup Clips (select
models} located in the
center of the upper rack
can be used to hold light-
weight plastic items,
cooking utensils, knives,
etc. in place. Clip the item
between the tine and the clip.
The Vari-[ock" Snugger
(select models]) on the left
secures lightweight items
in place. It can be
adjusted by grasping the
wavy wire and rotating it
left to snug items against
the outer rack or to the
right to rest on top of light items. Do not load items
on top of the were.
For best results with tall
glasses, rest the bottom of
the glass against the wavy
wire of the Vari-[oc_"
Snugger (select models).
" I
% i[ : _ , !
, _ ;<.._'" :-_ _S_ __ j_