Lights/Display; Delay; To Cancel A Delay And The Cycle - Jenn-Air JDB1250AWW Use & Care Manual

TheDelay optioncan be usedto automatically s tart
the cycleat a latertime to reducedaytime heat
buildupin the homeor to take advantage of reduced
energy costsif available in yourarea.Thisoptionis
alsouseful f or conserving hot waterat timesof high
household usage(showers, laundry).
Toset up a Delay:
1. Select t he appropriate cycleandoptionsfor the
load. Close the door.
2. Press the Delay pador buttonuntilthe desired
amountof delaytime is selected.
3. The Demay indicator and the count down display
(select models} will flash until the START!Cancel
pad or START button is pressed.
4° As soon as the START/Cancel pad or START
button is pressed, the flashing will stop and the
delay time will begin counting down. The Delay
indicator will remain lit until the delay time has
counted down.
5. The cycle will automatically start as soon as the
delay time expires.
To cancel a Delay:
When the delay is counting down, press the Delay
pad or button again. The indicator light will go out and
the cycle will start or resume immediately.
To cancel a Delay and the cycle:
[All touchpad control models}
. Press START!Cancel once to drain and turn off the
dishwasher.
Or
Press START/Cancel twice to turn dishwasher off
without draining.
To cancem a Delay and the cycle:
(Cycle selector knob models}
. Turn the cycle knob to [}rain/OFF. The dishwasher
will drain, then turn off.
Or
. Turn the cycle knob to [}rain/OFF, press the START
button once. The dishwasher will turn off without
draining.
If 30 seconds elapse between setting the cycle
and options and pressing the START/Cancel pad
or START button, the dishwasher will turn off.
12