Cycles At A Glance - Jenn-Air DW961 User Manual

Cycles/Options At A Glance
Your Jenn-Air dishwasher features various cycles to adjust to OPTIONS
your specific load conditions. (Features may vary slightly
depending on your model.) To start a cycle, simply close the
door until it latches and press the desired cycle pad.
DELAY can delay or interrupt any wash cycle from 1 hour
CYCLES to 9 hours.
To set up a delay, first select the appropriate cycle and
options for the load. Then, quickly press and hold the
Delay pad until the desired amount of delay time appears
in the display. The clock will count down and the cycle will
automatically start as soon as the delay time expires.
_,V:;¢_,¢¢_;_ If you wish to cancel the delay start simply press the Delay
_._:¢_:_,,;__'_o4_:;_,;,_:111 _ pad again. The indicator light will go out and the cycle will
_. _r,,:: _¢:___, ,_,_,_ start immediately.
POTS & PANS PreWash
provides a longer cycle for 3 Rinses 10.5 A NOTE - If delay is chosen without first selecting a
cycle and options, the dishwasher will select the last wash
items with heavy or baked- Main Wash Gal, cycle used in the delay mode.
on food soils. 2 Rinses
Dry This pad can also be pressed to temporarily interrupt a
cycle. The cycle will resume from the point of interruption
NORMAL PreWash when the delay time runs out or when the Delay pad is
is designed for loads 2 Rinses 9 pressed again.
containing normally Main Wash Gal. ACCU TEMP checks the main wash and final rinse water
soiled dishes. 2 Rinses temperatures and will extend the heating and water circu-
Dry lation until proper water temperature is reached. Heating
LIGHT 2 Rinses Delay will light in the window when selected. Press the pad
is designed for lightly Main Wash 7.5 again to cancel the option. See Hot Water Section on page 2.
soiled loads and china 2 Rinses Gal. SANI HEAT turns the heating element on during all wash
and rinse portions of the cycle. It checks the main wash and
and crystal items. Dry final rinse water temperatures and will extend the heating
QUICK Wash and water circulation until proper water temperature is
washes dusty or very lightly i 2 Rinses 4.5 reached. The Sani Heat light will glow when the option is
soiled items you plan to OFF Gal. selected. Press the pad again to cancel the option. (This
option does not sanitize the dishes.)
store or reuse immediately. HEAT DRY improves drying results by turning the heat-
Towel drying is necessary, ing element on during fan dry. A small indicator light will
RINSE & HOLD Rinse glow when it is selected. Cancelling Heat Dry turns the
rinses dishes being held for OFF 1.5 heating element off during the fan dry portion of the cycle.
a full load to reduce potential Gal. Towel drying of some items may be necessary.
food odor in the dishwasher. Your dishwasher features an option recall which mem-
orizes the options selected with a cycle. For example, if
ACCU TEMP, SANI HEAT or HEAT DRY is selected
with a cycle, it will be automatically recalled the next
time that cycle is selected.
A NOTE - With either dry option, it is normal to notice
vapor coming out of the vent area.
DRAIN/OFF. Pressing the pad once will drain the dish-
washer and then turn it off. Pressing the pad twice will turn
it off without draining.