Troubleshooting; Cooktop Controls - Electronic Touch Controls - Jenn-Air JEC0530ADS14 Use & Care Manual

30" and 36" (76.2cm and 91.4 cm) touch control radiant cooktop
Table of Contents

Advertisement

Available languages

Available languages

Metal marks from aluminum and copper
Cooktop Polishing Creme:
Clean as soon as cooktop has cooled down. Rub creme into
surface with a damp paper towel or soft cloth. Continue
rubbing until white film disappears. The marks will not totally
disappear but after many cleanings become less noticeable.
Tiny scratches
and abrasions
Cooktop Polishing Creme:
Rub creme into surface with a damp paper towel or soft
cloth. Continue rubbing until white film disappears.
Scratches
and abrasions do not affect cooking performance
and after
many cleanings become less noticeable.
COOKTOP
CONTROLS
To avoid damage to the cooktop controls, do not use steel wool,
abrasive cleansers or oven cleaner.
To avoid damage, do not soak knobs.
When replacing knobs, make sure knobs are in the Off position.
Do not remove seals under knobs.
Cleaning
Method:
Soap and water:
Pull knobs straight away from control panel to remove.
STAINLESS
STEEL (on some models)
To avoid damage to stainless steel surfaces, do not use soap-
filled scouring pads, abrasive cleaners, Cooktop Cleaner, steel-
wool pads, gritty washcloths
or abrasive paper towels.
Cleaning
Method:
Rub in direction of grain to avoid damaging.
KitchenAid ®Stainless Steel Cleaner and Polish (not included):
See "Assistance
or Service" section to order.
Liquid detergent or all-purpose
cleaner: Rinse with clean
water and dry with soft, lint-free cloth.
TROUBLESHOOTING
Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.
Nothing will operate
Cooktop cooking results not what expected
Has a household fuse blown, or has a circuit breaker
tripped?
Replace the fuse or reset the circuit breaker. If the problem
continues, call an electrician.
Cooktop
will not operate
Is the control set correctly?
Push in knob before turning to a setting.
Excessive heat around cookware
on cooktop
Is the proper cookware being used?
See "Cookware"
section.
Is the control set to the proper heat level?
See "Cooktop Controls - Electronic Touch Controls" section.
Is the "All Off Lock" Cooktop
Lockout
set?
See the "All Off/Lock" section.
Is the cooktop
level?
Level the cooktop. See the Installation Instructions.
Is the cooktop
beeping
continuously?
Wipe debris from the control panel surface.
Is the cookware
the proper size?
Use cookware about the same size as the surface cooking
area, element or surface burner. Cookware should not extend
more than 1/2"(1.3 cm) outside the cooking area.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents