Advertisement
Available languages
Available languages
Refrigerator Care
1. Remove food from refrigerator if power is lost.
2. Plug the refrigerator into a properly grounded wall
outlet. Do not cut or remove the third prong (ground)
from the power cord under any circumstances.
3. For any questions concerning power and/or grounding,
contact a certified electrician or a Sears service dealer
or other qualified service dealer.
4. After plugging the refrigerator into a wall outlet, allow it
to cool down for 2-3 hours before placing food in it.
Refrigerator Specifications
Voltage (V)
110
Frequency (Hz)
60
Current (A)
1.45
Input Wattage (W)
80
Volume (cu.ft.)
1.7
Dimension (mm)
440"471"494
Refrigerant
R134a
High Pressure (psig)
218
Low Pressure (psig)
88
Net Weight (kg)
17
Refrigerator Replacement
1. Pull out the plug from the wall outlet and take out all
food.
2. Unscrew the two screws from the back bracket of
the refrigerator, as shown in Fig. A.
3. Pull out the refrigerator from the front of the grill, as
shown in Fig. B.
4. Install the new refrigerator into the original location, put
the washers and screws back in, and tighten screws
securely.
Z___.l WARNING
Do not replace refrigerator when plug is
plugged into receptacle.
13
Fig. A
Refrigerator screws location
Fig. B
Removing out refrigerator
Advertisement
