For Recording - Hitachi VT-FX6407AS Owner's Manual

II I I II I
• About the VCR Plus+ system
This handy feature makes timed recording a snap. You don't need to enter
the specific channel, date, time, or duration of a program. All you enter is its
PlusCode programming number - a number of up to eight digits. This special
code is easy to find in your favorite TV program guide or daily newspaper.
Here's a sample page from "iV Guide showing PlusCode numbers next to
each program.
Your local channels may be different from the VCR Plus+ channel codes. To
get ready to record with the VCR Plus+ system you need to assign your local
broadcast and cable channel numbers to the VCR Plus+ channel codes
already stored in your VCR's memory. This is called channelsetup and you
do it using the on-screen Easy Guide System and the following step-by-step
instructions. Then you will be ready to begin VCR Plus+ recording, also using
the on-screen Easy Guide S_/stern.
VCR Plus+ ® and PlusCode ®are trademarks of Gemstar Development
Corporation.
• Channelsetup
Before you begin
0 "L.ookfor like this in
listing
a one
your local TV program guide or_
Sunday newspaper TV section.
Notice the small numbers to the
right of the station name.
These are the VCR Plus+ channel
numbers that you will use in the
channel setup procedure.
W]TV (Ind.) 04 VCR Plus+ Channels
WFYI (PBS) 20 /
mR WXIN (FOX) 50 /
(_ Arts & Entertainment /
Network 39
Cable News Network 42
_The Discovery Channel 37
eeee
O Make a list of the VCR Plus+
channel numbers and the channel
numbers you are receiving them
on. If there are any differences,
YOUR channel numbers must be
assigned to the corresponding
VCR Plus+ numbers.
(See Example)
eoee_ee_eeeOe_eeoeloeeOoo_oeoeeoeooDoeeeeeeo_eoeo
EXAMPLE
Note in the example that the
channel numbers are the same
except for 20 (received on channel
8) and 42 (received on channel 38).
These two channels must be
assigned.
41