Before You Record; Basic Recording Steps - Hitachi VT-MX4080EM Instruction Manual

@ Before you record
PREENACNTSERE EDTA SA CPE a SE ETERS et
DE a SETAE SE REE ES MMII REN EET TIE EEE
Note: The cassette safety The VCR. must be connected properly for recording: See the Basic. "
tab must be in place inorder _\nstallation at the beginning of this manual.
to record. Copyright infringement warning
To re-record on a cassette which
someone has legal rights governing the reproduction and distribution of
this material. In certain circumstances, copyright law may apply to private
in-home taping of copyrighted materials. In most cases, it is possible to
record for personal use, as long as you do not sell the material. You must
act responsibility in this area ~ check into the matter if you are unsure.
Cover the hole with
cellophane tape.
@ Basic recording steps
fem CE IS TEETER ENS PN kor ei Me EPS EER GAAS EE PIT 226 5 SELENE SST SI,
'Note: You may use a blank tape or you ray vecerd over a previously
recorded (erasable) tape.
Turn on the TV and select the video
programme number (described on
page 13).
Or, if you are connected with an |
audio/video cable, set the TV to
AUX or VIDEO.
1) CHEE HOHE OEE HEREC EOHE OE OH AEE HSEOHUOHHEHESLOUEOCOERUEN
, @ Insert a blank or erasable tape. a 7
The power turns on automatically rat : ny
and the tape indicator lights on the [0] 4 cl 0Lic os
display.
¢ If a cassette without its safety tab
is inserted, playback _ starts
automatically, and you cannot do
the record operation.
SPFOVSHESCHSCSHTSOE SEK OHHEHEES OCHS HRSHRHHKHEHKTOHOH AFL SBPOYVHERKED
Press the TAPE SPEED button to
select SP (standard play, for the one
best picture quality) or LP (long [I oc wa
play, for longest recording time on fm
a single tape).
Press the CH (A / ¥) button or the
(Example: Select channel 8.)
7 B
RECO | OP
56 ©
nee cut ro
HITACHI