Table of Contents
Advertisement
I
II
PO_4ER
_
W
EJECl"
C_DO00
® ®
PROGRAM
O
Press the PROGRAM button to
complete your programming or
PROGRAM
,_1L-LI T
(DnelaYatdrreC°rding I
continue with additional
programs.
The delayed recording indicator
will display on the VCR.
This tells you that the VCR will
/JJ
automatically
record at the times
and dates you have programmed.
Note: If a cassette has not been inserted or a cassette without safety tab has
been inserted, the delayed recording
indicator will flash to warn you.
The cassette without safety tab will be ejected automatically.
Be sure to insert
a cassette with safety tab intact.
W 2.';ou' av; a; ;.'e;;.;;; ;2o;r n;s;ouw;;t;
..............
• Don't forget to load a videocassette (with:the safety tab still attached) to
record on.
• If you have installed a cable box, turn on the cable box and select the
channel you want to record on the cable box before recording
starts.
Important:
Your timed recording settings take effect when you turn off the
power on the VCR.
Caution of VCR Plus+ Recording
After entering a PlusCOde number, check the information displayed with the
"PROGRAM REVIEW". If there is (are) any unnecessary program(s), please
cancel or correct it (them). Please refer to page 47, "Reviewing what you have
programmed".
To go into the recording mode:
1. Press the POWER button to turn the VCR on.
2. Turn on "IV and select the video Channel (3 or 4).
3. Press the TAPE SPEED button to switch the recording mode.
46
Advertisement
Table of Contents
