Picture In Picture (Pip) Operation - Hitachi 27FX48B Operating Manual

Picture In Picture (PIP) Operation
This television includes a two tuner Picture In Picture (PIP) feature. This allows watching two (2) live broadcasts at the
same time with or without an external video source (VCR).
Without a VCR
Procedure
• Connect incoming cable to antenna (ANT) input on back of TV.
• Press the PIP button on the Remote Control to display the PIP frame.
• Choose channels for the PIP frame by pressing the Remote Control PIP CH AT buttons.
• Choose channels for the Main Picture by pressing the Remote Control CH AT buttons or by using the numeric
keypad.
Note: The audio is for the Main Picture only.
With a VCR and Cable Box
Connectyourtelevisionto a VCR and Cable Box,as shown.
TERMINALS ON BACK OF 13/
VCR CABLE BOX
INCOMING
CABLE
CABLE SPLITTER
NOT SUPPLIED
Note: The Remote Control must be programmed with supplied codes to operate the VCR and Cable Box. (See
page 16.)
Procedure
Note:
Press the PIP button on the Remote Control to display the PIP frame.
To view scrambled channels through your Cable Box in the PIP frame:
• Press the INPUT button on the Remote Control to select the same video input to which your VCR is
connected.
• Verify the CABLE BOX and VCR are ON and the VCR tuned to channel 3 or 4.
• Choose channels for the PIP frame by pressing the CABLE button on the Remote Control and using the
numeric keypad or CH AT buttons.
• Choose channels for the Main Picture by pressing the TV button on the Remote Control and using the numeric
keypad or CH • _'buttons.
The audio is from the Main Picture only.
The SWAP button switches the PIP and
the Main Picture source. The RECALL
button shows the status of the PIP and
the Main Picture on the screen.
8