PICTURE*IN-PICTURE
CONT.
PICTURE-IN-PICTURE
(PIP)
SURF MODE
Press the "PIP" button to begin SURF MODE PIP. This feature will automatically scan through all active channels (those set in memory)
and display them as PIP sub-pictures, along the left and bottom edges of the screen. Press the "PIP" button a second time to remove
the sub-pictures from the screen.
OSPLIT
=_ OSURF
PIP
I NOTE:
1. If no buttons are pressed when in SURF MODE PIP mode, autoscanntng will continuously scan
2
If a channel is tuned during this SURF MODE PIP scanning, sub-pictures will be removed from the screen.
3 SURF MODE PiP is allowed only when ANT A is selected as the main channel.
(_) SWAP button
If you wish to switch what is being shown on the main picture to the sub-picture, press the "SWAP" button.
I NOTE:
The SWAP button will only operate when SPLIT mode PIP is chosen.
The SWAP function will not operate if ANT B input is set as the main channel (ANT B input cannot be displayed as a sub-
picture).
3O