Hitachi 27FX48B Operating Manual page 9

Picture In Picture (PIP) Operation (Cont.)
With a VCR - No Cable Box
This television includes a two tuner Picture In Picture (PIP) feature. This allows watching two (2) live broadcasts at the
same time without or with an external video source (VCR).
Connectyourtelevision to a VCR, as shown.
TERMINALS ON BACK OF"IV VCR
INCOMING
CABLE
CABLE SPLITTER
NOT SUPPUED
CABLES NOT SUPPLIED
Note: The Remote Control must be programmed with the supplied codes to operate the VCR. (See page 16).
PROCEDURE.
Press the PIP button on the Remote Control to display the PIP frame on screen.
Note: The audio is from the Main Picture only.
To view an extemal video source in the PIP frame:
• Press the INPUT button on the Remote Control to select the same video input to which your VCR is
connected.
• Verify the VCR is on.
• View the extemal video source in the PIP frame.
• Choose channels for the Main Picture by pressing the TV button on the Remote Control and using the numeric
keypad or CH A _r button.
The SWAP button switches the PIP and
the Main Picture source. The RECALL
button shows the status of the PIP and
the Main Picture on the screen.
9