Technical Data; Specifications - Husqvarna 125L Operator's Manual

TECHNICAL DATA
Technical data
1250 125L
Engine
Cylinder volume, cu.in./cm 3 1.7/28 1.7/28
Cylinder bore, inch/mm 1.4/35 1.4/35
Stroke, inch/ram t. 130/28.7 1.130/28.7
Idle speed, rpm 2,800-3,200 2,800-3,200
Recommended max. speed, rpm 10,000 11,000
Speed of output shaft, rpm 8,000 8,000
Max. engine output, acc. to ISO 8893, hp/kW 1.1/0.8 1.1/0.8
Catalytic converter muffler Yes Yes
Speed-regulated ignition system Yes Yes
Ignition system
Manufacturer/type of ignition system Waibro/CD Walbro/CD
Spark plug Champion Champion
RCJ-8Y RCJ-8Y
0.024/0.6 0.024/0.6
Electrode gap, inch/mm
Fuel and lubrication system
Manufacturer/type of carburetor Zama Zama
Fuel tank capacity, US pint/liter 0.85/0.4 0.85/0.4
Weight
Weight without fuel, cutting attachment and guard, Ibs/kg 10/4.4 11/4.8
Sound levels
(see note 1)
Equivalent sound pressure level at the user's ear,
measured according to ANSI B175.3-1997, dB(A),
min/max: 94/97 94/97
Vibration levels
Vibration levels at handles, measured according to
ANSIB175.3-1997, m/s 2
At idle, left/right handles: 3/5 3/5
At max. speed, left/right handles: 9/8 9/8
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for
noise pressure levels under various working conditions with the following time distribution:
1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user's ear and vibration on the handles are measured with all
the machine's approved cutting equipment fitted. The table indicates the highest and lowest
values.
Model 1250 (3/8 RH arbor shaft thread)
Approved accessories I Type
Trimmer head IT25
Cutting attachment guard, part. no.
531 00 92-78
Model 125L (M10 LH arbor shaft thread)
Approved accessories
Type
Trimmer head T25
Plastic blades Tricut 300 mm
Cutting attachment guard, part. no.
531 00 92-79
531 0038-11
21