Haier HLF103Q User Manual page 21

Bnsf®ll®fion in Mobile Home
Dryer must be exhausted outside (outdoors, not beneath the mobile
home) using metal ducting that will not support combustion.
Metal ducting must be 4 inches (10.t6 cm) in diameter with
no obstructions. Rigid metal duct is preferred.
If dryer is exhausted through the floor and area beneath the
mobile home is enclosed, the exhaust system must terminate
outside the enclosure with the termination securely fastened to the
mobile home structure.
Refer to previous pages for other important venting requirements.
*, Installation must conform to current Manufactured Home
Construction & Safety Standard.
Correct
Correct
incorrect
incorrect
Incorrect
2O